Additin® RC 2317

EP Additive

Type

EP additive; light-colored, low odored, low viscosity, active sulfur carrier

Application

– medium and heavy duty cutting oils
– deep hole drilling oils
– honing oils
– grinding oils
– broaching oils

Additin RC 2317 is a light-colored, near odorless, low viscosity sulfur carrier. It is used for manufacturing
metalworking fluids for cutting operations.Due to its low viscosity Additin RC 2317 is ideally suited for formulating metalworking fluids such as deep hole drilling and honing oils from which an excellent flushing effect is required. By virtue of specially selected raw materials, Additin RC 2317 exhibits a very low pourpoint and extended solubility in various base fluids compared to conventional sulfur carriers. Therefore Additin RC 2317 is ideally suited for metalworking oils based on hydrocracked base oils.

The performance of metalworking fluids containing Additin RC 2317 can be increased by combination with zinc dithiophosphates, e.g. Additin RC 3038, phosphoric acid partial esters or ashless phosphorus-sulphur additives
e.g. RC 3880.

Solubility

Soluble in mineral oils and synthetic base oils. However, it is necessary to verify the solubility in the base oils
used and the compatibility with other additives.

Packing unit

440 lb. bunghole drums

Storage conditions

In a dry place at room temperature approx. 12 months

Handling

Consult material safety data sheet (MSDS) for additional handling information on Additin RC 2317.